Publications de l'équipe Mécanique Numérique

Publications parues en 2017

  • A. Madra, J. Adrien, P. Breitkopf, E. Maire, and F. Trochu, A clustering method for analysis of morphology of short natural fibers in composites based on X-ray microtomography, Composites Part A: Applied Science and Manufacturing, Vol. 102, 2017, pp. 184-195.
  • L. Meng, P. Breitkopf, and G. Le Quilliec, An insight into the identifiability of material properties by instrumented indentation test using manifold approach based on P-h curve and imprint shape, International Journal of Solids and Structures, Vol. 106-107, 2017, pp. 13-26.
  • L. Meng, B. Raghavan, O. Bartier, X. Hernot, G. Mauvoisin, and P. Breitkopf, An objective meta-modeling approach for indentation-based material characterization, Mechanics of Materials, Vol. 107, 2017, pp. 31-44.
  • E. Marenić, D. Brancherie, and M. Bonnet, Application of asymptotic analysis to the two-scale modeling of small defects in mechanical structures, International Journal of Solids and Structures, Vol. 128, 2017, pp. 199-209.
  • H. Smaoui and S. Kaidi, Bed Shear Stresses Parameterization in Wave-Current Interaction by k - ω Turbulence Model, International Journal of Applied Mechanics, Vol. 9, No. 4, 2017.
  • X. N. Do, A. Ibrahimbegovic, and D. Brancherie, Dynamics framework for 2D anisotropic continuum-discrete damage model for progressive localized failure of massive structures, Computers and Structures, Vol. 183, 2017, pp. 14-26.
  • A. Chilali, M. Assarar, W. Zouari, H. Kebir, and R. Ayad, Effect of geometric dimensions and fibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting composites, Composites Part A: Applied Science and Manufacturing, Vol. 95, 2017, pp. 75-86.
  • L. Xia, F. Fritzen, and P. Breitkopf, Evolutionary topology optimization of elastoplastic structures, Structural and Multidisciplinary Optimization, Vol. 55, No. 2, 2017, pp. 569-581.
  • E. Lefrançois, How an added mass matrix estimation may dramatically improve FSI calculations for moving foils, Applied Mathematical Modelling, Vol. 51, 2017, pp. 655-668.
  • S. Orseau, S. Lesourd, N. Huybrechts, and A. Gardel, Hydro-sedimentary processes of a shallow tropical estuary under Amazon influence. The Mahury Estuary, French Guiana, Estuarine, Coastal and Shelf Science, Vol. 189, 2017, pp. 252-266.
  • S.-G. Cai, A. Ouahsine, J. Favier, and Y. Hoarau, Implicit immersed boundary method for fluid-structure interaction, Houille Blanche, No. 1, 2017, pp. 33-36.
  • L. Ross, A. Valle-Levinson, A. Sottolichio, and N. Huybrechts, Lateral variability of subtidal flow at the mid-reaches of a macrotidal estuary, Journal of Geophysical Research: Oceans, Vol. 122, No. 9, 2017, pp. 7651-7673.
  • P. Du, J. Wen, Z. Zhang, D. Song, A. Ouahsine, and H. Hu, Maintenance of air layer and drag reduction on superhydrophobic surface, Ocean Engineering, Vol. 130, 2017, pp. 328-335.
  • S.-G. Cai, A. Ouahsine, J. Favier, and Y. Hoarau, Moving immersed boundary method, International Journal for Numerical Methods in Fluids, Vol. 85, No. 5, 2017, pp. 288-323.
  • I. Imamovic, A. Ibrahimbegovic, and E. Mesic, Nonlinear kinematics Reissner's beam with combined hardening/softening elastoplasticity, Computers and Structures, Vol. 189, 2017, pp. 12-20.
  • S. Kaidi, H. Smaoui, and P. Sergent, Numerical estimation of bank-propeller-hull interaction effect on ship manoeuvring using CFD method, Journal of Hydrodynamics, Vol. 29, No. 1, 2017, pp. 154-167.
  • P. Moreno-Navarro, A. Ibrahimbegovic, and J. L. Pérez-Aparicio, Plasticity coupled with thermo-electric fields: Thermodynamics framework and finite element method computations, Computer Methods in Applied Mechanics and Engineering, Vol. 315, 2017, pp. 50-72.
  • L. Xia and P. Breitkopf, Recent Advances on Topology Optimization of Multiscale Nonlinear Structures, Archives of Computational Methods in Engineering, Vol. 24, No. 2, 2017, pp. 227-249.
  • P. Du, A. Ouahsine, K. T. Toan, and P. Sergent, Simulation of ship maneuvering in a confined waterway using a nonlinear model based on optimization techniques, Ocean Engineering, Vol. 142, 2017, pp. 194-203.
  • F. Linde, A. Ouahsine, N. Huybrechts, and P. Sergent, Three-dimensional numerical simulation of ship resistance in restricted waterways: Effect of ship sinkage and channel restriction, Journal of Waterway, Port, Coastal and Ocean Engineering, Vol. 143, No. 1, 2017.
  • L. Xia, B. Raghavan, and P. Breitkopf, Towards surrogate modeling of material microstructures through the processing variables, Applied Mathematics and Computation, Vol. 294, 2017, pp. 157-168.
  • F. Druesne, M. Hamdaoui, Q. Yin, and E. M. Daya, Variability Analysis of Modal Characteristics of Frequency-Dependent Visco-Elastic Three-Layered Sandwich Beams with Spatial Random Geometrical and Material Properties, Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 139, No. 6, 2017.

Publications parues en 2016

  • Yin, Q., F. Druesne, and P. Lardeur. The Certain Generalized Stresses Method for static analysis of multilayered composite plates with variability of material and physical properties. Composite Structures, Vol. 140, 2016, pp. 360-368.
  • Xia, L., and P. Breitkopf. Recent Advances on Topology Optimization of Multiscale Nonlinear Structures. Archives of Computational Methods in Engineering, 2016, pp. 1-23.
  • Tiar, A., W. Zouari, H. Kebir, and R. Ayad. A nonlinear finite element formulation for large deflection analysis of 2D composite structures. Composite Structures, Vol. 153, 2016, pp. 262-270.
  • Saksala, T., D. Brancherie, and A. Ibrahimbegovic. Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 40, No. 9, 2016, pp. 1339-1357.
  • Nikolić, M., T. Roje-Bonacci, and A. Ibrahimbegović. Overview of the numerical methods for the modelling of rock mechanics problems. Tehnicki Vjesnik, Vol. 23, No. 2, 2016, pp. 627-637.
  • Nikolic, M., A. Ibrahimbegovic, and P. Miscevic. Discrete element model for the analysis of fluid-saturated fractured poro-plastic medium based on sharp crack representation with embedded strong discontinuities. Computer Methods in Applied Mechanics and Engineering, Vol. 298, 2016, pp. 407-427.
  • Mamouri, S., R. Kouli, A. Benzegaou, and A. Ibrahimbegovic. Implicit controllable high-frequency dissipative scheme for nonlinear dynamics of 2D geometrically exact beam. Nonlinear Dynamics, Vol. 84, No. 3, 2016, pp. 1289-1302.
  • Mahjudin, M., P. Lardeur, F. Druesne, and I. Katili. Stochastic finite element analysis of plates with the Certain Generalized Stresses Method. Structural Safety, Vol. 61, 2016, pp. 12-21.
  • Ha, M. H., L. Cauvin, and A. Rassineux. A methodology to mesh mesoscopic representative volume element of 3D interlock woven composites impregnated with resin. Comptes Rendus - Mecanique, Vol. 344, No. 4-5, 2016, pp. 267-283.
  • Guedda, M., E. H. Aly, and A. Ouahsine. Corrigendum to "Analytical and ChPDM analysis of MHD mixed convection over a vertical flat plate emdedded in a porous medium filled with water at 4°C" [Appl. Math. Modell. 35 (2011) 5182-5197] Applied Mathematical Modelling, Vol. 40, No. 13-14, 2016, pp. 6785-6786.
  • Guedda, M., E. H. Aly, and A. Ouahsine. Analytical and ChPDM analysis of MHD mixed convection over a vertical flat plate emdedded in a porous medium filled with water at 4 degrees C (vol 35, pg 5182, 2011). Applied Mathematical Modelling, Vol. 40, No. 13-14, 2016, pp. 6785-6786.
  • Fritzen, F., L. Xia, M. Leuschner, and P. Breitkopf. Topology optimization of multiscale elastoviscoplastic structures. International Journal for Numerical Methods in Engineering, Vol. 106, No. 6, 2016, pp. 430-453.
  • Druesne, F., M. Hamdaoui, P. Lardeur, and E. M. Daya. Variability of dynamic responses of frequency dependent visco-elastic sandwich beams with material and physical properties modeled by spatial random fields. Composite Structures, Vol. 152, 2016, pp. 316-323.
  • Benamara, T., P. Breitkopf, I. Lepot, and C. Sainvitu. Adaptive infill sampling criterion for multi-fidelity optimization based on Gappy-POD: Application to the flight domain study of a transonic airfoil. Structural and Multidisciplinary Optimization, 2016, pp. 1-13.

Publications parues en 2015

  • Xia, L., and P. Breitkopf. Multiscale structural topology optimization with an approximate constitutive model for local material microstructure. Computer Methods in Applied Mechanics and Engineering, Vol. 286, 2015, pp. 147-167.
  • Xia, L., and P. Breitkopf. Design of materials using topology optimization and energy-based homogenization approach in Matlab. Structural and Multidisciplinary Optimization, Vol. 52, No. 6, 2015, pp. 1229-1241.
  • Vermeulen, T., C. Knopf-Lenoir, P. Villon, and B. Beckers. Urban layout optimization framework to maximize direct solar irradiation. Computers, Environment and Urban Systems, Vol. 51, 2015, pp. 1-12.
  • Sergent, P., E. Lefrançois, and N. Mohamad. Virtual bottom for ships sailing in restricted waterways (unsteady squat). Ocean Engineering, Vol. 110, 2015, pp. 205-214.
  • Saksala, T., D. Brancherie, I. Harari, and A. Ibrahimbegovic. Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials. International Journal for Numerical Methods in Engineering, Vol. 101, No. 3, 2015, pp. 230-250.
  • Rial, D., A. Tiar, H. Kebir, J.-M. Roelandt, and E. Wintrebert. Metallic braided structures: The mechanical modeling. Advanced Engineering Materials, Vol. 17, No. 6, 2015, pp. 893-904.
  • Nikolic, M., and A. Ibrahimbegovic. Rock mechanics model capable of representing initial heterogeneities and full set of 3D failure mechanisms. Computer Methods in Applied Mechanics and Engineering, Vol. 290, 2015, pp. 209-227.
  • Nikolic, M., A. Ibrahimbegovic, and P. Miscevic. Brittle and ductile failure of rocks: Embedded discontinuity approach for representing mode I and mode II failure mechanisms. International Journal for Numerical Methods in Engineering, Vol. 102, No. 8, 2015, pp. 1507-1526.
  • Meng, L., P. Breitkopf, B. Raghavan, G. Mauvoisin, O. Bartier, and X. Hernot. Identification of material properties using indentation test and shape manifold learning approach. Computer Methods in Applied Mechanics and Engineering, Vol. 297, 2015, pp. 239-257.
  • Le Quilliec, G., B. Raghavan, and P. Breitkopf. A manifold learning-based reduced order model for springback shape characterization and optimization in sheet metal forming. Computer Methods in Applied Mechanics and Engineering, Vol. 285, 2015, pp. 621-638.
  • Lecheb, S., A. Nour, A. Chellil, H. Mechakra, H. Ghanem, and H. Kebir. Dynamic prediction fatigue life of composite wind turbine blade. Steel and Composite Structures, Vol. 18, No. 3, 2015, pp. 673-691.
  • Hamdaoui, M., F.-Z. Oujebbour, A. Habbal, P. Breitkopf, and P. Villon. Kriging surrogates for evolutionary multi-objective optimization of CPU intensive sheet metal forming applications. International Journal of Material Forming, Vol. 8, No. 3, 2015, pp. 469-480.
  • Hamdaoui, M., F. Druesne, and E. M. Daya. Variability analysis of frequency dependent visco-elastic three-layered beams. Composite Structures, Vol. 131, 2015, pp. 238-247.
  • Fritzen, F., L. Xia, M. Leuschner, and P. Breitkopf. Topology optimization of multiscale elastoviscoplastic structures. 2015.
  • Cvitanović, N. S., M. Nikolić, and A. Ibrahimbegović. Influence of specimen shape deviations on uniaxial compressive strength of limestone and similar rocks. International Journal of Rock Mechanics and Mining Sciences, Vol. 80, 2015, pp. 357-372.
  • Ben Azzouna, M., P. Feissel, and P. Villon. Robust identification of elastic properties using the Modified Constitutive Relation Error. Computer Methods in Applied Mechanics and Engineering, Vol. 295, 2015, pp. 196-218.
  • Affagard, J.-S., P. Feissel, and S. F. Bensamoun. Measurement of the quadriceps muscle displacement and strain fields with ultrasound and Digital Image Correlation (DIC) techniques. IRBM, Vol. 36, No. 3, 2015, pp. 170-177.
  • Affagard, J.-S., P. Feissel, and S. F. Bensamoun. Identification of hyperelastic properties of passive thigh muscle under compression with an inverse method from a displacement field measurement. Journal of Biomechanics, Vol. 48, No. 15, 2015, pp. 4081-4086.
  • Dao, T.T., A. Rassineux, F. Charleux, and M.C. Ho Ba Tho. A robust protocol for the creation of patient specific finite element models of the musculoskeletal system from medical imaging data. Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization, Vol. 3, No. 3, 2015, pp. 136-146.

Publications parues en 2014

  • Xiao, M., P. Breitkopf, R. F. Coelho, P. Villon, and W. Zhang. Proper orthogonal decomposition with high number of linear constraints for aerodynamical shape optimization. Applied Mathematics and Computation, Vol. 247, 2014, pp. 1096-1112.
  • Xia, L., and P. Breitkopf. Concurrent topology optimization design of material and structure within FE2 nonlinear multiscale analysis framework. Computer Methods in Applied Mechanics and Engineering, Vol. 278, 2014, pp. 524-542.
  • Xia, L., and P. Breitkopf. A reduced multiscale model for nonlinear structural topology optimization. Computer Methods in Applied Mechanics and Engineering, Vol. 280, 2014, pp. 117-134.
  • Saleh, K., A. J. Moufarej, M. Morgeneyer, E. Lefrancois, B. Le, and J. Bouillard. Dust generation from powders: A characterization test based on stirred fluidization. Powder Technology, Vol. 255, 2014, pp. 141-148.
  • Rial, D., H. Kebir, E. Wintrebert, and J.-M. Roelandt. Multiaxial fatigue analysis of a metal flexible pipe. Materials and Design, Vol. 54, 2014, pp. 796-804.
  • Ngo, M., D. Brancherie, and A. Ibrahimbegovic. Softening behavior of quasi-brittle material under full thermo-mechanical coupling condition: Theoretical formulation and finite element implementation. Computer Methods in Applied Mechanics and Engineering, Vol. 281, 2014, pp. 1-28.
  • Le Quilliec, G., P. Breitkopf, J.-M. Roelandt, and P. Juillard. Semi-analytical approach for plane strain sheet metal forming using a bending-under-tension numerical model. International Journal of Material Forming, Vol. 7, No. 2, 2014, pp. 221-232.
  • Lecheb, S., A. Nour, A. Chellil, H. Mechakra, A. Amarache, and H. Kebir. An advanced dynamic repair of edge crack aluminum plate with a composite patch. Materials Science Forum, Vol. 794-796, 2014, pp. 716-721.
  • Lecheb, S., A. Nour, A. Chellil, R. Lechani, and H. Kebir. Dynamic behavior to fatigue crack initiation of a glass/epoxy laminate. Key Engineering Materials, Vol. 577-578, 2014, pp. 677-680.
  • Lebon, J., G. Le Quilliec, P. Breitkopf, C. Filomeno, and P. Villon. A two-pronged approach for springback variability assessment using sparse polynomial chaos expansion and multi-level simulations. International Journal of Material Forming, Vol. 7, No. 3, 2014, pp. 275-287.
  • Labergere, C., A. Rassineux, and K. Saanouni. Numerical simulation of continuous damage and fracture in metal-forming processes with 2D mesh adaptive methodology. Finite Elements in Analysis and Design, Vol. 82, 2014, pp. 46-61.
  • Kebir, H., and R. Ayad. A specific finite element procedure for the analysis of elastic behaviour of short fibre reinforced composites. The Projected Fibre approach. Composite Structures, Vol. 118, No. 1, 2014, pp. 580-588.
  • Ji, S., A. Ouahsine, H. Smaoui, and P. Sergent. 3D numerical simulation of ship-induced waves and sediment transport in restricted waterways. Houille Blanche-Revue Internationale De L Eau, No. 6, 2014, pp. 68-73.
  • Ji, S.-C., A. Ouahsine, H. Smaoui, P. Sergent, and G.-Q. Jing. Impacts of ship movement on the sediment transport in shipping channel. Journal of Hydrodynamics, Vol. 26, No. 5, 2014, pp. 706-714.
  • Ji, S., A. Ouahsine, H. Smaoui, and P. Sergent. 3D numerical modeling of sediment resuspension induced by the compounding effects of ship-generated waves and the ship propeller. Journal of Engineering Mechanics, Vol. 140, No. 6, 2014.
  • Ji, S., A. Ouahsine, H. Smaoui, and P. Sergent. 3D Modeling of sediment movement by ships-generated wakes in confined shipping channel. International Journal of Sediment Research, Vol. 29, No. 1, 2014, pp. 49-58.
  • Hamdaoui, M., G. Le Quilliec, P. Breitkopf, and P. Villon. POD surrogates for real-time multi-parametric sheet metal forming problems. International Journal of Material Forming, Vol. 7, No. 3, 2014, pp. 337-358.
  • El Wassifi, K., A. Ouahsine, H. Smaoui, P. Sergent, and R. Khiri. Coupled 1D-river and 2D-overland flow model to simulate the rainfall-runoff process in watersheds. Houille Blanche-Revue Internationale De L Eau, No. 6, 2014, pp. 6-12.
  • Druesne, F., M. B. Boubaker, and P. Lardeur. Fast methods based on modal stability procedure to evaluate natural frequency variability for industrial shell-type structures. Finite Elements in Analysis and Design, Vol. 89, 2014, pp. 93-106.
  • Chellil, A., A. Nour, S. Lecheb, M. Chibani, and H. Kebir. Parameter identification of crack growth in helicopter blade. Key Engineering Materials, Vol. 577-578, 2014, pp. 673-676.
  • Cai, S.-G., A. Ouahsine, H. Smaoui, J. Favier, and Y. Hoarau. An efficient implicit direct forcing immersed boundary method for incompressible flows. Journal of Physics: Conference Series, Vol. 574, No. 1, 2014.
  • Bui, N. N., M. Ngo, M. Nikolic, D. Brancherie, and A. Ibrahimbegovic. Enriched Timoshenko beam finite element for modeling bending and shear failure of reinforced concrete frames. Computers and Structures, Vol. 143, 2014, pp. 9-18.
  • Affagard, J.-S., S. F. Bensamoun, and P. Feissel. Development of an inverse approach for the characterization of in vivo mechanical properties of the lower limb muscles. Journal of Biomechanical Engineering, Vol. 136, No. 11, 2014.
  • Xiao, M., W. Zhang, and P. Breitkopf. Application of POD projection to orientation optimization of laminated composite design. Advanced Materials Research, Vol. 634-638, No. 1, 2013, pp. 1890-1895.
  • Xiao, M., P. Breitkopf, C. Filomeno, C. Knopf-Lenoir, P. Villon, and W. Zhang. Constrained Proper Orthogonal Decomposition based on QR-factorization for aerodynamical shape optimization. Applied Mathematics and Computation, Vol. 223, 2013, pp. 254-263.
  • Xia, L., J. Zhu, W. Zhang, and P. Breitkopf. An implicit model for the integrated optimization of component layout and structure topology. Computer Methods in Applied Mechanics and Engineering, Vol. 257, 2013, pp. 87-102.
  • Xia, L., B. Raghavan, P. Breitkopf, and W. Zhang. Numerical material representation using proper orthogonal decomposition and diffuse approximation. Applied Mathematics and Computation, Vol. 224, 2013, pp. 450-462.
  • Tran, K., A. Ouahsine, H. Naceur, and K. El Wassifi. Assessment of ship manoeuvrability by using a coupling between a nonlinear transient manoeuvring model and mathematical programming techniques. Journal of Hydrodynamics, Vol. 25, No. 5, 2013, pp. 788-804.
  • Raghavan, B., L. Xia, P. Breitkopf, A. Rassineux, and P. Villon. Towards simultaneous reduction of both input and output spaces for interactive simulation-based structural design. Computer Methods in Applied Mechanics and Engineering, Vol. 265, 2013, pp. 174-185.
  • Raghavan, B., G. Le Quilliec, P. Breitkopf, A. Rassineux, J.-M. Roelandt, and P. Villon. Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds. International Journal of Material Forming, Vol. 7, No. 4, 2013, pp. 487-501.
  • Raghavan, B., M. Hamdaoui, M. Xiao, P. Breitkopf, and P. Villon. A bi-level meta-modeling approach for structural optimization using modified POD bases and Diffuse Approximation. Computers and Structures, Vol. 127, 2013, pp. 19-28.
  • Raghavan, B., and P. Breitkopf. Asynchronous evolutionary shape optimization based on high-quality surrogates: Application to an air-conditioning duct. Engineering with Computers, Vol. 29, No. 4, 2013, pp. 467-476.
  • Raghavan, B., P. Breitkopf, Y. Tourbier, and P. Villon. Towards a space reduction approach for efficient structural shape optimization. Structural and Multidisciplinary Optimization, Vol. 48, No. 5, 2013, pp. 987-1000.
  • Pham, B. H., D. Brancherie, L. Davenne, and A. Ibrahimbegovic. Stress-resultant models for ultimate load design of reinforced concrete frames and multi-scale parameter estimates. Computational Mechanics, Vol. 51, No. 3, 2013, pp. 347-360.
  • Ouahsine, A., H. Smaoui, K. Meftah, P. Sergent, and F. Sabatier. Numerical study of coastal sandbar migration, by hydro-morphodynamical coupling. Environmental Fluid Mechanics, Vol. 13, No. 2, 2013, pp. 169-187.
  • Ngo, V.-M., A. Ibrahimbegović, and D. Brancherie. Model for localized failure with thermo-plastic coupling: Theoretical formulation and ED-FEM implementation. Computers and Structures, Vol. 127, 2013, pp. 2-18.
  • Ngo, M., A. Ibrahimbegovic, and D. Brancherie. Continuum damage model for thermo-mechanical coupling in quasi-brittle materials. Engineering Structures, Vol. 50, 2013, pp. 170-178.
  • Lecheb, S., A. Nour, A. Chellil, S. Sam, D. Belmiloud, and H. Kebir. Prediction life of horizontal rotors by natural frequency evolution. Lecture Notes in Mechanical Engineering, Vol. 1, 2013, pp. 105-110.
  • Lardeur, P., R. Scigliano, and M. Scionti. Verification and validation for the vibration study of automotive structures modelled by finite elements. Journal of Strain Analysis for Engineering Design, Vol. 48, No. 1, 2013, pp. 59-72.
  • Huybrechts, N., Y. F. Zhang, and M. A. Verbanck. Coupled estimation of the energy slope and associated sand-silt transport during high stream power events in alluvial rivers. International Journal of Sediment Research, Vol. 28, No. 1, 2013, pp. 58-65.
  • Huybrechts, N., and C. Villaret. Large-scale morphodynamic modeling of the Gironde estuary, France. Proceedings of the Institution of Civil Engineers: Maritime Engineering, Vol. 166, No. 2, 2013, pp. 51-62.
  • Chellil, A., A. Nour, S. Lecheb, H. Kebir, and Y. Chevalier. Impact of the fuselage damping characteristics and the blade rigidity on the stability of helicopter. Aerospace Science and Technology, Vol. 29, No. 1, 2013, pp. 235-252.
  • Chellil, A., A. Nour, S. Lecheb, M. Chibani, and H. Kebir. Numerical stress and fatigue behavior of a helicopter blade by modal analysis. Lecture Notes in Mechanical Engineering, Vol. 1, 2013, pp. 175-180.
  • Ben Azzouna, M., P. Feissel, and P. Villon. Identification of elastic properties from full-field measurements: A numerical study of the effect of filtering on the identification results. Measurement Science and Technology, Vol. 24, No. 5, 2013.
  • Ayhan, B., P. Jehel, D. Brancherie, and A. Ibrahimbegovic. Coupled damage-plasticity model for cyclic loading: Theoretical formulation and numerical implementation. Engineering Structures, Vol. 50, 2013, pp. 30-42.
  • Assanelli, A. P., Y. Ben-Haim, R. Burguete, J. Cafeo, E. Hack, G. Lampeas, P. Lardeur, Z. Lu, J. Mottershead, F. Pierron, M. Prime, T. Siebert, S. Fu, and E. Patterson. Special issue on validation of computational solid mechanics models. Journal of Strain Analysis for Engineering Design, Vol. 48, No. 1, 2013, pp. 3-4.
  • Xiao, M., P. Breitkopf, C. Filomeno, C. Knopf-Lenoir, and P. Villon. Enhanced POD projection basis with application to shape optimization of car engine intake port. Structural and Multidisciplinary Optimization, Vol. 46, No. 1, 2012, pp. 129-136.
  • Smaoui, H., L. Zouhri, A. Ouahsine, and E. Carlier. Modelling of groundwater flow in heterogeneous porous media by finite element method. Hydrological Processes, Vol. 26, No. 4, 2012, pp. 558-569.
  • Smaoui, H., and A. Ouahsine. Extension of the skin shear stress Li's relationship to the flat bed. Environmental Fluid Mechanics, Vol. 12, No. 3, 2012, pp. 201-207.
  • Shiri, S., H. Naceur, and J. M. Roelandt. Numerical modelling of sheet metal forming and crashworthiness of laminated steel structures using multi-layered solid-shell elements. European Journal of Computational Mechanics, Vol. 21, No. 3-6, 2012, pp. 351-364.
  • Raghavan, B., M. Xiao, P. Breitkopf, and P. Villon. Implicit constraint handling for shape optimisation with POD-morphing. European Journal of Computational Mechanics, Vol. 21, No. 3-6, 2012, pp. 325-336.
  • Lardeur, P., E. Arnoult, L. Martini, and C. Knopf-Lenoir. The Certain Generalized Stresses Method for the static finite element analysis of bar and beam trusses with variability. Finite Elements in Analysis and Design, Vol. 50, 2012, pp. 231-242.
  • Kaidi, S., M. Rouainia, and A. Ouahsine. Stability of breakwaters under hydrodynamic loading using a coupled DDA/FEM approach. Ocean Engineering, Vol. 55, 2012, pp. 62-70.
  • Kaidi, S., A. Ouahsine, P. Sergent, and M. Rouainia. Discontinuous Deformation Analysis to assess the stability of rockfill dams under seismic loading. Comptes Rendus - Mecanique, Vol. 340, No. 10, 2012, pp. 731-738.
  • Ji, S. C., A. Ouahsine, H. Smaoui, and P. Sergent. 3-D numerical simulation of convoy-generated waves in a restricted waterway. Journal of Hydrodynamics, Vol. 24, No. 3, 2012, pp. 420-429.
  • Issa, M., C. Labergère, K. Saanouni, and A. Rassineux. Numerical prediction of thermomechanical field localization in orthogonal cutting. CIRP Journal of Manufacturing Science and Technology, Vol. 5, No. 3, 2012, pp. 175-195.
  • Hello, G., H. Kebir, A. Rassineux, and L. Chambon. Simulation of ductile tearing by the BEM with 2D domain discretization and a local damage model. Engineering Analysis with Boundary Elements, Vol. 36, No. 4, 2012, pp. 527-536.
  • Hautefeuille, M., J.-B. Colliat, A. Ibrahimbegovic, H. G. Matthies, and P. Villon. A multi-scale approach to model localized failure with softening. Computers and Structures, Vol. 94-95, 2012, pp. 83-95.
  • Guedda, M., and A. Ouahsine. Similarity solutions of MHD flows in a saturated porous medium. European Journal of Mechanics, B/Fluids, Vol. 33, 2012, pp. 87-94.
  • Edward, L., S. Dakpe, P. Feissel, B. Devauchelle, and F. Marin. Quantification of facial movements by motion capture. Computer methods in biomechanics and biomedical engineering, Vol. 15 Suppl 1, 2012, pp. 259-260.
  • Cauvin, L., D. Kondo, M. Brieu, and N. Bhatnagar. Mechanical properties of polypropylene layered silicate nanocomposites: Characterization and micro-macro modeling (vol 29, pg 245, 2010). Polymer Testing, Vol. 31, No. 8, 2012, pp. 1140-1140.
  • Boufflet, J. P., M. Dambrine, G. Dupire, and P. Villon. On the necessity of Nitsche term. Part II: An alternative approach. Applied Numerical Mathematics, Vol. 62, No. 5, 2012, pp. 521-535.
  • Bonnaillie-Noël, V., D. Brancherie, M. Dambrine, and G. Vial. Artificial boundary conditions to compute correctors in linear elasticity. Numerical Analysis and Applications, Vol. 5, No. 2, 2012, pp. 129-135.

Contact

Directeur du laboratoire ROBERVAL
Jérôme Favergeon
Tél : 03 44 23 45 33 | Contacter par mail

Responsable de l'équipe Mécanique Numérique
Delphine Brancherie
Tél : 03 44 23 52 71 | Contacter par mail