Publications de l'équipe Matériaux et Surfaces

Publications parues en 2017

  • N. Tableau, Z. Aboura, K. Khellil, L. Marcin, and F. Bouillon, Accurate measurement of in-plane and out-of-plane shear moduli on 3D woven SiC-SiBC material, Composite Structures, Vol. 172, 2017, pp. 319-329.
  • H. S. Ho, M. Risbet, and X. Feaugas, A cyclic slip irreversibility based model for fatigue crack initiation of nickel base alloys, International Journal of Fatigue, Vol. 102, 2017, pp. 1-8.
  • H. Chambon, P. Nicolay, G. Bruckner, and A. Benjeddou, Analysis of the sensitivity to pressure and temperature of a membrane based SAW sensor, International Journal of Smart and Nano Materials, Vol. 8, No. 2-3, 2017, pp. 95-109.
  • Y. Hou, T. Sapanathan, A. Dumon, P. Culière, and M. Rachik, A novel development of bi-level reduced surrogate model to predict ductile fracture behaviors, 2017.
  • M. Bigerelle, J. Marteau, and F. Blateyron, Assessing the discriminating power of roughness parameters using a roughness databank, Surface Topography: Metrology and Properties, Vol. 5, No. 2, 2017.
  • M.-C. Demizieux, J. Favergeon, L. Martinelli, C. Desgranges, and G. Sattonnay, Assessment of a Mechanical Model Associated with Oxide Scale Growth on T91 Steel at 550 C Under Wet Atmosphere, Oxidation of Metals, Vol. 88, No. 1-2, 2017, pp. 57-70.
  • D. Fettré, J. Favergeon, and S. Bouvier, Detection of Breakaway for a High-Temperature Oxidation of Pure Zirconium Using Acoustic Emission Correlated to Thermogravimetry, Oxidation of Metals, Vol. 87, No. 3-4, 2017, pp. 367-379.
  • C. Trevisiol, A. Jourani, and S. Bouvier, Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel, Wear, Vol. 388-389, 2017, pp. 101-111.
  • C. Trevisiol, A. Jourani, and S. Bouvier, Effect of martensite volume fraction and abrasive particles size on friction and wear behaviour of a low alloy steel, Tribology International, Vol. 113, 2017, pp. 411-425.
  • C. Issartel, H. Buscail, S. Chevalier, and J. Favergeon, Effect of Yttrium as Alloying Element on a Model Alumina-Forming Alloy Oxidation at 1100 C, Oxidation of Metals, Vol. 88, No. 3-4, 2017, pp. 409-420.
  • P. Sautrot-Ba, A. Contreras, S. Abbad-Andaloussi, T. Corandin, C. Hélary, N. Razza, M. Sangermano, P.E. Mazeran, J.P. Malval, and D. Versace, Eosin-mediated synthesis of polymer coatings combining photodynamic inactivation and antimicrobial properties, Journal of Materials Chemistry B, Vol. 5, No. 36, 2017, pp. 7572-7582.
  • L. Kurpaska, M. Frelek-Kozak, J.L. Grosseau-Poussard, I. Jozwik, L. Lahoche, J. Favergeon, and J. Jagielski, Identification of the Zirconia Phases by Means of Raman Spectroscopy for Specimens Prepared by FIB Lift-Out Technique, Oxidation of Metals, Vol. 88, No. 3-4, 2017, pp. 521-530.
  • T. Sapanathan, R. N. Raoelison, N. Buiron, and M. Rachik, In situ metallic porous structure formation due to ultra high heating and cooling rates during an electromagnetic pulse welding, Scripta Materialia, Vol. 128, 2017, pp. 10-13.
  • A.-X. Fan, S. Dakpé, T. T. Dao, P. Pouletaut, M. Rachik, and B. T. Ho, MRI-based finite element modeling of facial mimics: a case study on the paired zygomaticus major muscles, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 20, No. 9, 2017, pp. 919-928.
  • F. Bedoui, N. S. Murthy, and J. Kohn, Structure and Thermal Transitions in a Biomedically Relevant Liquid Crystalline Poly(ester amide), Macromolecules, Vol. 50, No. 6, 2017, pp. 2257-2266.
  • H. Boussetta, M. Beyaoui, A. Laksimi, L. Walha, and M. Haddar, Study of the filament wound glass/polyester composite damage behavior by acoustic emission data unsupervised learning, Applied Acoustics, Vol. 127, 2017, pp. 175-183.
  • B. Dylewski, M. Risbet, and S. Bouvier, The tridimensional gradient of microstructure in worn rails - Experimental characterization of plastic deformation accumulated by RCF, Wear, Vol. 392-393, 2017, pp. 50-59.
  • J. Marteau, C. Paulin, and M. Bigerelle, The use of multiscale transfer functions for understanding the impact of successive mechanical treatments on surface topography, Tribology International, Vol. 114, 2017, pp. 429-435.
  • P.-E. Mazeran, M.-F. Arvieu, M. Bigerelle, and S. Delalande, Torsion delamination test, a new method to quantify the adhesion of coating: Application to car coatings, Progress in Organic Coatings, Vol. 110, 2017, pp. 134-139.
  • J. Marteau and M. Bigerelle. Toward an understanding of the effect of surface roughness on instrumented indentation results. Journal of Materials Science, Vol. 52, No. 12, 2017, pp. 7239-7255.

Publications parues en 2016

  • Sapanathan, T., R. N. Raoelison, E. Padayodi, N. Buiron, and M. Rachik. Depiction of interfacial characteristic changes during impact welding using computational methods: Comparison between Arbitrary Lagrangian - Eulerian and Eulerian simulations. Materials and Design, Vol. 102, 2016, pp. 303-312.
  • Roy, M., L. Martinelli, K. Ginestar, J. Favergeon, and G. Moulin. Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 °c. Journal of Nuclear Materials, Vol. 468, 2016, pp. 153-163.
  • Revel, P., N. Jouini, G. Thoquenne, and F. Lefebvre. High precision hard turning of AISI 52100 bearing steel. Precision Engineering, Vol. 43, 2016, pp. 24-33.
  • Mbengue, S. S., N. Buiron, and V. Lanfranchi. Macroscopic modeling of anisotropic magnetostriction and magnetization in soft ferromagnetic materials. Journal of Magnetism and Magnetic Materials, Vol. 404, 2016, pp. 74-78.
  • Mbengue, S. S., N. Buiron, and V. Lanfranchi. Corrigendum to: "Macroscopic modeling of anisotropic magnetostriction and magnetization in soft ferromagnetic materials" (J. Magn. Magn. Mater. (2015) 404C (74-78) DOI: 10.1016/j.jmmm.2015.12.001). Journal of Magnetism and Magnetic Materials, Vol. 408, 2016, p. 331.
  • Mbengue, S. S., N. Buiron, and V. Lanfranchi. An anisotropic model for magnetostriction and magnetization computing for noise generation in electric devices. Sensors (Switzerland), Vol. 16, No. 4, 2016.
  • Marteau, J., and S. Bouvier. Characterization of the microstructure evolution and subsurface hardness of graded stainless steel produced by different mechanical or thermochemical surface treatments. Surface and Coatings Technology, Vol. 296, 2016, pp. 136-148.
  • Kurpaska, L., J. Favergeon, J.-L. Grosseau-Poussard, L. Lahoche, and G. Moulin. In-situ stress analysis of the Zr/ZrO2 system as studied by Raman spectroscopy and deflection test in monofacial oxidation techniques. Applied Surface Science, Vol. 385, 2016, pp. 106-112.
  • Jourani, A. Effect of 3D fractal dimension on contact area and asperity interactions in elastoplastic contact. AIP Advances, Vol. 6, No. 5, 2016.
  • Fan, B., F. Bedoui, S. Weigand, and J. Bai. Conductive network and β polymorph content evolution caused by thermal treatment in carbon nanotubes-BaTiO3 hybrids reinforced polyvinylidene fluoride composites. Journal of Physical Chemistry C, Vol. 120, No. 17, 2016, pp. 9511-9519.
  • Deltombe, R., M. Bigerelle, and A. Jourani. Analysis of the effects of different machining processes on sealing using multiscale topography. Surface Topography-Metrology and Properties, Vol. 4, No. 1, 2016, p. 15003.
  • Condat, M., J. Babinot, S. Tomane, J.-P. Malval, I.-K. Kang, F. Spillebout, P.-E. Mazeran, J. Lalevée, S. A. Andalloussi, and D.-L. Versace. Development of photoactivable glycerol-based coatings containing quercetin for antibacterial applications. RSC Advances, Vol. 6, No. 22, 2016, pp. 18235-18245.

Publications parues en 2015

  • Raoelison, R. N., T. Sapanathan, N. Buiron, and M. Rachik. Magnetic pulse welding of Al/Al and Al/Cu metal pairs: Consequences of the dissimilar combination on the interfacial behavior during the welding process. Journal of Manufacturing Processes, Vol. 20, 2015, pp. 112-127.
  • Raoelison, R. N., D. Racine, Z. Zhang, N. Buiron, D. Marceau, and M. Rachik. Magnetic pulse welding: Interface of Al/Cu joint and investigation of intermetallic formation effect on the weld features. Journal of Manufacturing Processes, Vol. 16, No. 4, 2015, pp. 427-434.
  • Nguyen, T. L., F. Bédoui, P.-E. Mazeran, and M. Guigon. Mechanical investigation of confined amorphous phase in semicrystalline polymers: Case of PET and PLA. Polymer Engineering and Science, Vol. 55, No. 2, 2015, pp. 397-405.
  • Nesterova, E. V., S. Bouvier, and B. Bacroix. Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading. Materials Characterization, Vol. 100, 2015, pp. 152-162.
  • Naceur, H., J. Lin, D. Coutellier, and A. Laksimi. Efficient smoothed particle hydrodynamics method for the analysis of planar structures undergoing geometric nonlinearities. Journal of Mechanical Science and Technology, Vol. 29, No. 5, 2015, pp. 2147-2155.
  • Marteau, J., S. Bouvier, and M. Bigerelle. Review on Numerical Modeling of Instrumented Indentation Tests for Elastoplastic Material Behavior Identification. Archives of Computational Methods in Engineering, Vol. 22, No. 4, 2015, pp. 577-593.
  • Lorenzini, C., A. Haider, I.-K. Kang, M. Sangermano, S. Abbad-Andalloussi, P.-E. Mazeran, J. Lalevée, E. Renard, V. Langlois, and D.-L. Versace. Photoinduced Development of Antibacterial Materials Derived from Isosorbide Moiety. Biomacromolecules, Vol. 16, No. 3, 2015, pp. 683-694.
  • Lin, J., A. Laksimi, H. Naceur, and D. Coutellier. Geometrically nonlinear analysis of two-dimensional structures using an improved smoothed particle hydrodynamics method. Engineering Computations (Swansea, Wales), Vol. 32, No. 3, 2015, pp. 779-805.
  • Laksimi, A., A. Elhakimi, S. Hariri, and Z. Azari. Calculation of defects in pressurised cylindrical shells instrumented by acoustic emission and strain gauges. Materiaux & Techniques, Vol. 103, No. 7, 2015.
  • Jourani, A. Three dimensional modelling of temperature distribution during belt finishing. International Journal of Surface Science and Engineering, Vol. 9, No. 2-3, 2015, pp. 231-246.
  • Jourani, A. Numerical simulations of the surface topography effect on the generated frictional heat distribution in brake systems. Indian Journal of Engineering and Materials Sciences, Vol. 22, No. 6, 2015, pp. 611-617.
  • Jourani, A. Modelling of ploughing-cutting transition regime during abrasive manufacturing process. International Journal of Mechatronics and Manufacturing Systems, Vol. 8, No. 1-2, 2015, pp. 19-32.
  • Jourani, A. Effect of roughness geometries in contact mechanics. International Journal of Materials and Product Technology, Vol. 51, No. 2, 2015, pp. 127-138.
  • Jourani, A. A New Three-Dimensional Numerical Model of Rough Contact: Influence of Mode of Surface Deformation on Real Area of Contact and Pressure Distribution. Journal of Tribology-Transactions of the Asme, Vol. 137, No. 1, 2015, p. 11401.
  • Jourani, A., and S. Bouvier. Friction and Wear Mechanisms of 316L Stainless Steel in Dry Sliding Contact: Effect of Abrasive Particle Size. Tribology Transactions, Vol. 58, No. 1, 2015, pp. 131-139.
  • Fettré, D., S. Bouvier, J. Favergeon, and L. Kurpaska. Residual stresses in high temperature corrosion of pure zirconium using elasto-viscoplastic model: Application to the deflection test in monofacial oxidation. Applied Surface Science, Vol. 357, 2015, pp. 777-786.
  • Condat, M., P.-E. Mazeran, J.-P. Malval, J. Lalevée, F. Morlet-Savary, E. Renard, V. Langlois, S. Abbad Andalloussi, and D.-L. Versace. Photoinduced curcumin derivative-coatings with antibacterial properties. RSC Advances, Vol. 5, No. 104, 2015, pp. 85214-85224.
  • Baudequin, T., M. Naudot, F. Bedoui, M. Dufresne, S. Dupont, H. Bouhlal, S. Testelin, B. Devauchelle, J. Marolleau, and C. Legallais. Bone Tissue Engineering for Maxillofacial Area: A Sheet-like Substitute Based on Human Endothelial and Stem Cells Co-culture. Tissue Engineering Part A, Vol. 21, 2015, pp. S118-S118.
  • Baudequin, T., F. Bedoui, M. Dufresne, P. Paullier, and C. Legallais. Towards the Development and Characterization of an Easy Handling Sheet-Like Biohybrid Bone Substitute. Tissue Engineering - Part A, Vol. 21, No. 11-12, 2015, pp. 1895-1905.

Publications parues en 2014

  • Xia, Y., M. Bigerelle, J. Marteau, P.-E. Mazeran, S. Bouvier, and A. Iost. Effect of surface roughness in the determination of the mechanical properties of material using nanoindentation test. Scanning, Vol. 36, No. 1, 2014, pp. 134-149.
  • Xia, Y., M. Bigerelle, S. Bouvier, A. Iost, and P.-E. Mazeran. Quantitative approach to determine the mechanical properties by nanoindentation test: Application on sandblasted materials. Tribology International, Vol. 82, No. PB, 2014, pp. 297-304.
  • Turki, Y., M. Habak, R. Velasco, Z. Aboura, K. Khellil, and P. Vantomme. Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites. International Journal of Machine Tools and Manufacture, Vol. 87, 2014, pp. 61-72.
  • Oueslati, Z., M. Rachik, and M.-F. Lacrampe. Modeling of multilayered sheets for thermoforming applications. Advanced Materials Research, Vol. 941-944, 2014, pp. 2378-2382.
  • Marteau, J., and M. Bigerelle. Relation between surface hardening and roughness induced by ultrasonic shot peening. Tribology International, Vol. 83, 2014, pp. 105-113.
  • Marteau, J., M. Bigerelle, P.-E. Mazeran, and S. Bouvier. Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening. Tribology International, Vol. 82, No. PB, 2014, pp. 319-329.
  • Marteau, J., M. Bigerelle, S. Bouvier, and A. Iost. Reflection on the measurement and use of the topography of the indentation imprint. Scanning, Vol. 36, No. 1, 2014, pp. 115-126.
  • Madra, A., N. El Hajj, and M. Benzeggagh. X-ray microtomography applications for quantitative and qualitative analysis of porosity in woven glass fiber reinforced thermoplastic. Composites Science and Technology, Vol. 95, 2014, pp. 50-58.
  • Lin, J., H. Naceur, A. Laksimi, and D. Coutellier. On the implementation of a nonlinear shell-based SPH method for thin multilayered structures. Composite Structures, Vol. 108, No. 1, 2014, p. 905914.
  • Lin, J., H. Naceur, D. Coutellier, and A. Laksimi. Geometrically nonlinear analysis of thin-walled structures using efficient Shell-based SPH method. Computational Materials Science, Vol. 85, 2014, pp. 127-133.
  • Lin, J., H. Naceur, D. Coutellier, and A. Laksimi. Efficient meshless SPH method for the numerical modeling of thick shell structures undergoing large deformations. International Journal of Non-Linear Mechanics, Vol. 65, 2014, pp. 1-13.
  • Leclerc, G. E., Q. Dermigny, M. Rachik, and M. C. Ho Ba Tho. Biaxial mechanical response of graft material derived from human skin. Computer Methods in Biomechanics and Biomedical Engineering, Vol. 17, No. SUPP1, 2014, pp. 26-27.
  • Lascoup, B., Z. Aboura, K. Khellil, and M. Benzeggagh. Core-skin interfacial toughness of stitched sandwich structure. Composites Part B: Engineering, Vol. 67, 2014, pp. 363-370.
  • Jousset, P., and M. Rachik. Implementation, identification and validation of an elasto-plastic-damage model for the finite element simulation of structural bonded joints. International Journal of Adhesion and Adhesives, Vol. 50, 2014, pp. 107-118.
  • Jousset, P., and M. Rachik. Comparison and evaluation of two types of cohesive zone models for the finite element analysis of fracture propagation in industrial bonded structures. Engineering Fracture Mechanics, Vol. 132, 2014, pp. 48-69.
  • Jourani, A. A new three-dimensional numerical model of rough contact: Influence of mode of surface deformation on real area of contact and pressure distribution. Journal of Tribology, Vol. 137, No. 1, 2014.
  • Jouini, N., P. Revel, and M. Bigerelle. Relevance of roughness parameters of surface finish in precision hard turning. Scanning, Vol. 36, No. 1, 2014, pp. 86-94.
  • Jaramillo-Isaza, S., P.-E. Mazeran, K. El Kirat, and M. C. Ho Ba Tho. Time-dependent mechanical properties of rat femoral cortical bone by nanoindentation: An age-related study. Journal of Materials Research, Vol. 29, No. 10, 2014, pp. 1135-1143.
  • Ho Ba Tho, M. C., T. T. Dao, S. Bensamoun, S. Dakpe, B. Devauchelle, and M. Rachik. Subject specific modeling of the muscle activation: Application to the facial mimics. Advances in Intelligent Systems and Computing, Vol. 245, 2014, pp. 423-433.
  • Ho, H. S., M. Risbet, and X. Feaugas. On the unified view of the contribution of plastic strain to cyclic crack initiation: Impact of the progressive transformation of shear bands to persistent slip bands. Acta Materialia, Vol. 85, 2014, pp. 155-167.
  • Guillemot, G., M. Bigerelle, and Z. Khawaja. 3D parameter to quantify the anisotropy measurement of periodic structures on rough surfaces. Scanning, Vol. 36, No. 1, 2014, pp. 127-133.
  • Gonzato, C., P. Pasetto, F. Bedoui, P.-E. Mazeran, and K. Haupt. On the effect of using RAFT and FRP for the bulk synthesis of acrylic and methacrylic molecularly imprinted polymers. Polymer Chemistry, Vol. 5, No. 4, 2014, pp. 1313-1322.
  • Dang, W. D., P. Jousset, and M. Rachik. Weld-bonded joints properties with advanced high strength steel DP600. Advanced Materials Research, Vol. 941-944, 2014, pp. 2066-2073.
  • Alhussein, A., M. Risbet, A. Bastien, J. P. Chobaut, D. Balloy, and J. Favergeon. Influence of silicon and addition elements on the mechanical behavior of ferritic ductile cast iron. Materials Science and Engineering A, Vol. 605, 2014, pp. 222-228.
  • Raoelison, R. N., N. Buiron, M. Rachik, D. Haye, G. Franz, and M. Habak. Study of the elaboration of a practical weldability window in magnetic pulse welding. Journal of Materials Processing Technology, Vol. 213, No. 8, 2013, pp. 1348-1354.
  • Marteau, J., H. Haddadi, and S. Bouvier. Investigation of Strain Heterogeneities Between Grains in Ferritic and Ferritic-Martensitic Steels. Experimental Mechanics, Vol. 53, No. 3, 2013, pp. 427-439.
  • Marteau, J., M. Bigerelle, Y. Xia, P.-E. Mazeran, and S. Bouvier. Quantification of first contact detection errors on hardness and indentation size effect measurements. Tribology International, Vol. 59, 2013, pp. 154-162.
  • Jourani, A., B. Hagège, S. Bouvier, M. Bigerelle, and H. Zahouani. Influence of abrasive grain geometry on friction coefficient and wear rate in belt finishing. Tribology International, Vol. 59, 2013, pp. 30-37.
  • Jouini, N., P. Revel, P.-E. Mazeran, and M. Bigerelle. The ability of precision hard turning to increase rolling contact fatigue life. Tribology International, Vol. 59, 2013, pp. 141-146.
  • Ho, H. S., Y. Xia, J. Marteau, and M. Bigerelle. Influence of the roughness of sandblasted surface on the measurement of hardness by nanoindentation. Materiaux et Techniques, Vol. 101, No. 3, 2013.
  • Ho, H. S., M. Risbet, and X. Feaugas. Correlation of precipitation state in a nickel-base superalloy on fatigue damage: A local approach of crack initiation resulting from the localization of plastic deformation on slip band. Materials Letters, Vol. 93, 2013, pp. 207-209.
  • Djeddi, L., R. Khelif, S. Benmedakhene, and J. Favergeon. Reliability of acoustic emission as a technique to detect corrosion and stress corrosion cracking on prestressing steel strands. International Journal of Electrochemical Science, Vol. 8, No. 6, 2013, pp. 8356-8370.
  • Carvalho-Resende, T., S. Bouvier, F. Abed-Meraim, T. Balan, and S.-S. Sablin. Dislocation-based model for the prediction of the behavior of b.c.c. materials - Grain size and strain path effects. International Journal of Plasticity, Vol. 47, 2013, pp. 29-48.
  • Carvalho-Resende, T., T. Balan, S. Bouvier, F. Abed-Meraim, and S.-S. Sablin. Numerical investigation and experimental validation of a plasticity model for sheet steel forming. Modelling and Simulation in Materials Science and Engineering, Vol. 21, No. 1, 2013.
  • Bigerelle, M., D. Najjar, T. Mathia, A. Iost, T. Coorevits, and K. Anselme. An expert system to characterise the surfaces morphological properties according to their tribological functionalities: The relevance of a pair of roughness parameters. Tribology International, Vol. 59, 2013, pp. 190-202.
  • Bigerelle, M., G. Guillemot, Z. Khawaja, M. El Mansori, and J. Antoni. Relevance of Wavelet Shape Selection in a complex signal. Mechanical Systems and Signal Processing, Vol. 41, No. 1-2, 2013, pp. 14-33.
  • Benmhenni, N., S. Bouvier, R. Brenner, T. Chauveau, and B. Bacroix. Micromechanical modelling of monotonic loading of CP α-Ti: Correlation between macroscopic and microscopic behaviour. Materials Science and Engineering A, Vol. 573, 2013, pp. 222-233.
  • Zejli, H., L. Gaillet, A. Laksimi, and S. Benmedakhene. Detection of the presence of broken wires in cables by acoustic emission inspection. Journal of Bridge Engineering, Vol. 17, No. 6, 2012, pp. 921-927.
  • Tirry, W., S. Bouvier, N. Benmhenni, W. Hammami, A. M. Habraken, F. Coghe, D. Schryvers, and L. Rabet. Twinning in pure Ti subjected to monotonic simple shear deformation. Materials Characterization, Vol. 72, 2012, pp. 24-36.
  • Raoelison, R. N., N. Buiron, M. Rachik, D. Haye, and G. Franz. Efficient welding conditions in magnetic pulse welding process. Journal of Manufacturing Processes, Vol. 14, No. 3, 2012, pp. 372-377.
  • Noel, O., P.-E. Mazeran, and H. Nasrallah. Sliding velocity dependence of adhesion in a nanometer-sized contact. Physical Review Letters, Vol. 108, No. 1, 2012.
  • Mechraoui, S.-E., A. Laksimi, and S. Benmedakhene. Reliability of damage mechanism localisation by acoustic emission on glass/epoxy composite material plate. Composite Structures, Vol. 94, No. 5, 2012, pp. 1483-1494.
  • Mazeran, P.-E., M. Beyaoui, M. Bigerelle, and M. Guigon. Determination of mechanical properties by nanoindentation in the case of viscous materials. International Journal of Materials Research, Vol. 103, No. 6, 2012, pp. 715-722.
  • Marteau, J., P.-E. Mazeran, S. Bouvier, and M. Bigerelle. Zero-point correction method for nanoindentation tests to accurately quantify hardness and indentation size effect. Strain, Vol. 48, No. 6, 2012, pp. 491-497.
  • Marouani, H., M. Rachik, and E. Hug. Experimental investigations and FEM simulations of parameters influencing the Fe-(wt.3%)Si shearing process. Mechanics and Industry, Vol. 13, No. 4, 2012, pp. 271-278.
  • Lascoup, B., Z. Aboura, K. Khellil, and M. Benzeggagh. Prediction of out-of-plane behavior of stitched sandwich structure. Composites Part B: Engineering, Vol. 43, No. 8, 2012, pp. 2915-2920.
  • Iost, A., G. Guillemot, Y. Rudermann, and M. Bigerelle. A comparison of models for predicting the true hardness of thin films. Thin Solid Films, Vol. 524, 2012, pp. 229-237.
  • Ho Ba Tho, M. C., P. E. Mazeran, K. El Kirat, and S. F. Bensamoun. Multiscale characterization of human cortical bone. CMES - Computer Modeling in Engineering and Sciences, Vol. 87, No. 6, 2012, pp. 557-577.
  • Henry, J., Z. Aboura, K. Khellil, and S. Otin. Fatigue damaging analysis of a carbon/epoxy 3D layer interlock with acoustic emission. Materiaux et Techniques, Vol. 100, No. 6-7, 2012, pp. 643-652.
  • El Hajj, N., R. M. Dheilly, A. Goullieux, Z. Aboura, M. L. Benzeggagh, and M. Quéneudec. Innovant agromaterials formulated with flax shaves and proteinic binder: Process and characterization. Composites Part B: Engineering, Vol. 43, No. 2, 2012, pp. 381-390.
  • Dahmene, F., A. Laksimi, S. Hariri, C. Hervé, L. Jaubert, M. Cherfaoui, and A. Mouftiez. Acoustic wave propagation in austenitic stainless steel AISI 304L: Application examples. International Journal of Pressure Vessels and Piping, Vol. 92, 2012, pp. 77-83.
  • Bouvier, S., N. Benmhenni, W. Tirry, F. Gregory, M. E. Nixon, O. Cazacu, and L. Rabet. Hardening in relation with microstructure evolution of high purity a-titanium deformed under monotonic and cyclic simple shear loadings at room temperature. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, Vol. 535, 2012, pp. 12-21.
  • Bigerelle, M., T. Mathia, and S. Bouvier. The multi-scale roughness analyses and modeling of abrasion with the grit size effect on ground surfaces. Wear, Vol. 286-287, 2012, pp. 124-135.
  • Bedoui, F., L. K. Widjaja, A. Luk, D. Bolikal, N. S. Murthy, and J. Kohn. Anomalous increase in modulus upon hydration in random copolymers with hydrophobic segments and hydrophilic blocks. Soft Matter, Vol. 8, No. 7, 2012, pp. 2230-2236.

Contact

Directeur du laboratoire ROBERVAL
Jérôme Favergeon
Tél : 03 44 23 45 33 | Contacter par mail

Responsable de l'équipe Matériaux et Surfaces
Aboura Zoheir
Tél : 03 44 23 49 27 | Contacter par mail