Roberval


Accueil > Annuaire

Ibrahimbegovic Adnan


Mr. Adnan Ibrahimbegovic is Professor Classe Exceptionnelle at UTC, Senior Fellow of IUF-Institute Universitaire de France and holder of a Chair in Mechanics Picardie.
http://roberval.utc.fr/spip.php?page=rubrique&id_rubrique=206&lang=en

He was attributed a number of research awards, including Alexander von Humboldt Research Award in 2005, IACM Fellow Award in 2006 and Slovenian Research Award in 2007.

Researcher ORCID identifier : http://orcid.org/0000-0002-6502-0198

Contact :
UTC / Lab. de Mécanique Roberval / Centre de Recherche Royallieu / 60200 Compiegne, France

e-mail : adnan.ibrahimbegovic@utc.fr
tel. +33.3.44.23.45.34 , mob. +33.6.07.94.97.80

Educations :

  • 1997 HDR in Mechanics at University Pierre et Marie Curie (Paris 6), France
  • 1989 Doctorate (PhD) in Mechanics of Structures at University of California, Berkeley, United States
  • Books written by Adnan Ibrahimbegovic :
  • Ibrahimbegovic A. (ed.), ‘Computational Methods for Solids and Fluids : Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, (ISBN 978-3-319-27994-7), pp. 1-493, (2016)
  • Ibrahimbegovic A., ‘Nonlinear solid mechanics : theoretical formulations and finite element solution methods’, Springer, Berlin, (ISBN 978-90-481-2330), pp. 1-571, (2009)
  • Ibrahimbegovic A., M. Zlatar (eds.), ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, (ISBN : HB 978-90-481-2385-8, PB 978-90-481-2384-1, E-book 978-90-481-2386-5), pp 1-405, (2009)
  • Ibrahimbegovic A., I. Kozar (eds.), ‘Extreme man-made and natural hazards in dynamics of structures’, Springer, Berlin, (ISBN : HB 978-1-4020-5654-3, PB 978-1-4020-5655-0, E-book 978-1-4020-5656-7) pp 1-397 (2007)
  • Ibrahimbegovic A., ‘Mécanique non linéaire des solides déformables : Formulation théorique et résolution numérique par éléments finis’, Hermes Science Publication - Lavoisier, Paris (ISBN 2-7462-1489-X) pp 1-604 (2006). Nomination pour le prix ROBERVAL pour Enseignement Supérieur (en 2008) :
  • Ibrahimbegovic A., B. Brank (eds.), Multi-physics and multi-scale computer models in nonlinear analysis and optimal design of engineering structures under extreme conditions, IOS Press, Amsterdam, (ISBN 1-58803-479-0) pp 1-407 (2005)

Research Activities :

"Initially, my research activities were developed in the domain of Computational Mechanics, and later expanded to many other domains of solid and structureal mechanics, either theoretical, applied or numerical modeling aspects."

Main research activities and domains of Adnan Ibrahimbegovic :

  • Theoretical Solid Mechanics in Large Deformations and Localization Problems,
  • Nonlinear Structural Mechanics and Instability at Large Rotations,
  • Computational Mechanics and Finite Element Method,
  • Nonlinear Dynamics of Structures and Multibody Systems.

My former collaborators (total : 31, last 6 years : 16) are presently at elite engineering schools in Paris (Ecole des Ponts Paris, Ecole Centrale Paris, ESTP), institutes of technology (MIT-Boston, PEER/UC-Berkeley, ZHAW -Zurich University of Applied Sciences, TU Braunschweig, UTC-Compiègne, INSA-Toulouse), French universities (University Paris X, University Lille 1, University de Nantes) and large industry groups, (AREVA, EDF, Lafarge, Renault) ;
My former international students are now professors in 9 different countries : Mexico, Czech Republic, Slovenia, Vietnam, Algeria, Bosnia, Croatia, Hungary, Turkey.

Current collaborations :

- post-doc :
C.G. Quesada (with A.V. Salsac, D. Brancherie)
M. Nikolic
X.N. Do

- doctoral students : :
E. Hajdo (with S. Dolarevic)
M.S. Sarfaraz (with H. Matthies)
A. Stanic (with B. Brank)
T. Rukavina (with I. Kozar)
E. Hadzalic (with S. Dolarevic)
E. Karavelic (with A. Kurtovic)
A. Boujelben
P. Moreno-Navarro (with J.L. Perez-Arapacio)
S. Grbcic (with G. Jelenic)
I. Rukavina (with A. Ospina, F. Ben Belgacem)
J. Rocca (with N. Limnios)

Responsibilities collectives :

Member of Editorial Boards :

  • Coupled Systems Mechanics (Chief Editor)
  • Computational Mechanics (until 2015)
  • Computer Modeling in Engineering Sciences (until 2002)
  • Computers and Concrete
  • Computers and Structures
  • European Journal for Finite Elements (until 2008)
  • Finite Elements in Analysis and Design
  • French Journal for Civil Engineering (until 2010)
  • International Journal of Advanced Modelling and Simulation in Engineering Sciences
  • International Journal of Computational Methods in Engineering Sciences and Mechanics
  • International Journal of Engineering Computations
  • International Journal of Engineering Modeling
  • International Journal of Serbian Society of Computational Mechanics
  • International Journal of Structural Engineering and Mechanics
  • Journal of Structural Mechanics (Rakenteiden Mekaniikka)

Conference Organisation :

  • ECCOMAS Thematic 3rd Conference ‘Multiscale computational methods in solids and fluids’, Ljubljana, September 20-22, 2017
  • ACSM16 : International Conference on Coupled Systems Mechanics, Jeju, South Korea, August 28-September 1, 2016 (with Phill-Seung Lee)
  • Organized Mini-Symposium WCCM 2016 Seoul, South Korea, July 24-27, 2016 (with H. Matthies, Q.Y. Fang)
  • Organized Mini-Symposium ECCOMAS Congress 2016 European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece , June 5-19, 2016 (with H. Matthies)
  • Organized Session on ‘Inelastic response of heterogeneous media’, COMPLAS-XIII Conference on Computational Plasticity, Barcelona, September 1-3, 2015 (with H. Matthies)
  • ECCOMAS Thematic 2nd Conference ‘Multiscale computational methods in solids and fluids’, Sarajevo, June 10-12, 2015
  • Minisymposium on ‘Uncertainty Propagation in Heterogeneous Materials’, UNCECOMP 2015 : Conference on Uncertainty Quantification in Computational Sciences and Engineering, May 25-27, 2015 (with H. Matthies)
  • IASS-IACM 2012 7th International Conference on « Computational Mechanics for Spatial Structures », Sarajevo, April, 2012
  • Minisymposium sur ‘Multiscale methods for failure analysis of composite materials, structures and systems’, ASEM’11plus:The First World Congress on Advances in Structural Engineering and Mechanics (avec G. Lubineau), Seoul, South Korea, 18-23 September 211
  • Session organisée sur ‘Inelastic Processes in Heterogeneous Materials’, COMPLAS-XI Conference on Computational Plasticity, Barcelona, 7-9 septembre, 2011 (avec H. Matthies)
  • Session organisée sur « Material Heterogeneities and Probability Aspects », WCCM-9 Ninth World Congress on Computational Mechanics, Sydney, Australia, July 16-21, 2010 (avec H. Matthies)
  • Session organisée sur « Multiscale Methods in Solid and Fluid Mechanics », ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010 (avec L. Desvillettes)
  • Session organisée sur « Heterogeneous Materials with Inelastic Behavior », ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010 (avec H. Matthies)
  • BICTAM International Symposium on ‘Mesh-Free, Particle and Extended Finite Element Methods’, Nanjing, China, October 12-16, 2009
  • Session organisée sur « Heterogeneities in plasticity » in COMPLAS-X : Computational Plasticity, 2-4 septembre 2009, Barcelone, Espagne (avec H. Matthies)
  • Session organisée sur « Nonlinear Dynamics » in COMPDYN-2009 : Computational Methods in Structural Dynamics and Earthquake Engineering. Rhodes, Greece, 22-24 juin 2009 (avec L. Davenne)
  • Session organisée sur « Computational Mechanics of Concrete Structures », CTCS’09 : International Conference Computational Technologies in Concrete Structures, Jeju, South Korea, 24-30 mai 2009
  • Conference NATO-ARW « Damage assessment and reconstruction after natural disasters and previous military activities », NATO Advanced Research Workshop (ARW), Sarajevo, Bosnie, 5-9 octobre 2008 (avec M. Zlatar)
  • IUTAM-IACC Minisymposium sur « Role of heterogeneities and uncertainties in inelastic response of materials », WCCM-8 World Congress in Computational Mechanics, Venice, juillet 2008 (avec H. Matthies)
  • IACM Minisymposium sur « Multiscale modelling of concrete and concrete structures », WCCM-8 World Congress in Computational Mechanics, Venice, juillet 2008 (avec P. Marovic et N. Bicanic)
  • ECCOMAS Thematic Conference « Multiscale computational and mathematical methods in solids and fluids », Paris, 28-30 novembre 2007
  • Session organisée sur ‘Role of heterogeneities in plasticity’ in COMPPLAS-2007 : Computational Plasticity, 5-7 septembre 2007, Barcelone, Espagne
  • Session organisée sur ‘Nonlinear Dynamics’ in COMPDYN : Computational Methods in Structural Dynamics and Earthquake Engineering. Rethymnon, Crete, Greece, juin 2007
  • Colloque NATO ARW « Extreme Man-Made and Natural Hazards in Dynamics of Structures », NATO Advanced Research Workshop (ARW), Opatija, Croatie, 28 mai – 1 juin, 2006 (avec I. Kozar)
  • Session organisée sur ‘Plasticity Issues in Structures’, COMPLAS 8 Computational Plasticity, 5-8 avril 2005, Barcelone, Espagne
  • Session organisée sur ‘Flexible Mulitbody Dynamics’, ECCOMAS Conference on Multibody Dynamics 2005, du 21 au 24 juin 2005, Madrid, Espagne
  • Session organisée sur ‘Nonlinear Dynamics – Spanning the Scales : Algorithms and Applications’, Third MIT Conference on Computational Fluid and Solid Mechanics, du 14 au 17 juin 2005, Boston, Etats-Unis
  • Session organisée sur ‘Nonlinear shell computations in coupled problems’, IACM-IASS 5th International Conference on Computations in Shells and Spatial Structures, du 1 au 4 juin, Saltzbourg, Autriche
  • NATO ARW "Multi-physics and Multi-scale Computer Models in Nonlinear Analysis and Optimal Design of Engineering Structures", NATO Advanced Research Workshop (ARW), Bled, Slovenia, du 13 au 17 juin 2004 (http://arw-bled2004.scix.net)
  • 16ème Congrès Français de Mécanique : Thème scientifique "Mécanique des solides et des matériaux" (grandes déformations, endommagement, rupture, fatigue, approche multi-échelles, homogénéisation, couplages thermomécaniques, …), Nice, septembre 2003
  • Session organisée sur ’Inelastic Constitutive Behavior : Micro-macro and Phenomenological Models’, Second MIT Conference on Computational Fluid and Solid Mechanics, juin 2003, Boston

Principal publications :

Year 2017

Karavelic E., M. Nikolic, A. Ibrahimbegovic, A. Kurtovic, Concrete meso-scale model with full set of 3D failure modes with random distribution of aggregate and cement phase. Part I : formulation and numerical implementation, Comput. Methods Appl. Mech. Engrg., in press (2017)

Ibrahimbegovic, A., Boujelben, A., “Long-term simulation of wind turbine structure for distributed loading describing long-term wind loads for preliminary design”, Coupled Systems Mechanics, in press (2017)

Sarfaraz S.M., Rosic B.V, Matthies H.G., Ibrahimbegovic, A., ‘Stochastic Upscaling via Linear Bayesian Updating’, Coupled Systems Mechanics, in press (2017)

Hadzalic E., A. Ibrahimbegovic, M. Nikolic, ’Failure mechanisms in coupled poro-plastic medium’, Coupled Systems Mechanics, in press (2017)

Kožar, I., Ibrahimbegovic, A. and Rukavina, T., “Material model for load rate sensitivity”, Coupled Systems Mechanics, in press (2017)

Imamovic I., A. Ibrahimbegovic, E. Mesic, ‘Nonlinear kinematics Reissner’s beam with
combined hardening/softening elastoplasticity’, Computers Structures, 189, 12-20, (2017)

Hadzalic E., A. Ibrahimbegovic, S. Dolarevic, ’Failure mechanisms in coupled soil-foundation systems’, Coupled Systems Mechanics, in press (2017)

Boujelben A., A. Ibrahimbegovic, ‘Finite-strain three-dimensional solids with rotational degrees of freedom : non-linear statics and dynamics’, Adv. Modeling Simulation Eng. Sciences, 4 :3, 1-24, (2017)

Karavelic E. M. Nikolic, A. Ibrahimbegovic, ‘Multiscale Model of Concrete Failure’, in (ed. D. Brancherie, S. Bouvier, P. Feissel, A. Ibrahimbegovic), ISTE Wiley, (2017)

Sarfaraz S.M., B.V. Rosic, H.G. Matthies, A. Ibrahimbegovic, ‘Stochastic Upscaling via Linear Bayesian Updating’, in (ed. P. Wriggers), Springer, (2017)

Moreno-Navarro P., A. Ibrahimbegovic, J.L. P-erez-Aparicio, Linear behavior for fully coupled thermo-electro-magneto-mechanic systems, Coupled Systems Mechanics, in press (2017)

Nikolic M., E. Karavelic, A. Ibrahimbegovic, P. Miscevic, ’Lattice element models and their peculiarities’, Archives of Computational Methods in Engineering, in press, (2017)

Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Dynamics framework for 2D anisotropic continuum-discrete damage model for progressive localized failure of massive structures, Computers Structures, 183, 14-26, (2017)

Moreno-Navarro P., A. Ibrahimbegovic, J.L. Perez-Aparicio, ’Plasticity coupled with thermo-electric fields : Thermodynamics framework and finite element method computations’, Comput. Methods Appl. Mech. Engrg., 315, 50-72, (2017)

Year 2016

Ibrahimbegovic, ‘Computations, testing, uncertainty propagation and size effect in localized failure of massive composite structures’, in (ed. A. Zingoni) ‘Insight and Innovation in Structural Engineering, Mechanics and Computations’, CRC Press, (2016)

Ibrahimbegovic A., C. Kassiotis, R. Niekamp, ‘Fluid-structure interaction problems solution by operator split methods and efficient software development by code-coupling’, Coupled Systems Mechanics, 5, 145-156 (2016)

Saksala T., D. Brancherie, A. Ibrahimbegovic, ‘Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model’, International Journal for Numerical and Analytical Methods in Geomechanics, 40, 1339-1357, (2016)

Mamouri S., R. Kouli, A. Benzegaou, A. Ibrahimbegovic, ‘Implicit controllable high-frequency dissipative scheme for nonlinear dynamics of 2D geometrically exact beam’, Nonlin. Dynamics, 84, 1289-1302, (2016)

Nikolic M., A. Ibrahimbegovic, P. Miscevic, ‘Discrete element model for the analysis of fluid-saturated fractured poro-plastic medium based on sharp crack representation with embedded strong discontinuities’, Computer Methods in Applied Mechanics and Engineering, 298, 407-427, 2016 :

Nikolic M., T. Roje-Bonacci, A. Ibrahimbegovic, ‘Overview of the numerical methods for the modelling of rock mechanics problems’, Technical Gazette, 23, 621-637, 2016

Year 2015

Brank B., A. Stanic, A. Ibrahimbegovic, ‘A path-following method based on plastic dissipation control’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids : Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, in press, 2015

Marenic E., A. Ibrahimbegovic, ‘Multiscale atomistic-to-continuum reduced models for micromechanical systems’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids : Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, in press, 2015

Niekamp R., M. Kroche, A. Ibrahimbegovic, ‘Heterogeneous Materials Models, Coupled Mechanics-Probability Problems and Energetically Optimal Model Reduction’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids : Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, in press, 2015

Nikolic M., A. Ibrahimbegovic, P. Miscevic, ‘Modelling of fluid-structure interaction for internal fluid flow in cracks by using embedded strong discontinuities’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids : Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, in press, 2015

Imamovic I., A. Ibrahimbegovic, C. Knopf-Lenoir, E. Mesic, Plasticity-damage model parameters identification for structural connections, Coupled Systems Mechanics, 4, 337-364, (2015)

Štambuk-Cvitanović N., M. Nikolic, A. Ibrahimbegovic, ‘Influence of specimen shape deviations on uniaxial compressive strength of limestone and similar rocks’, Int. Journal for Rock Mechanics and Mining, 80, 357-372, (2015)

Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Localized failure in damage dynamics’, Coupled Systems Mechanics, 4, 211-235, (2015)

Marenic E., A. Ibrahimbegovic, ‘Homogenized elastic properties of graphene for moderate deformations’, Coupled Systems Mechanics, 4, 137-155, 2015

Nikolic M., A. Ibrahimbegovic, ‘Rock mechanics capable of representing heterogeneities and full set of 3D failure mechanisms’, Computer Methods in Applied Mechanics and Engineering, 290, 209-229, 2015

Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Combined hardening and localized failure with softening plasticity in dynamics’, Coupled Systems Mechanics, 4, 115-136, 2015

NIKOLIC M., A. IBRAHIMBEGOVIC, P. MISCEVIC, ‘Brittle and ductile failure of rocks : embedded discontinuity approach for representing mode I and mode II failure mechanisms’, Int. J. Numerical Methods Engineering, 102, 1507-1526, 2015

SAKSALA T., D. BRANCHERIE, I. HARARI, A. IBRAHIMBEGOVIC, ‘Rate-dependent continuum damage-embedded discontinuity model for explicit dynamic analyses of fracture in quasi-brittle materials’, Int. J. Numerical Methods Engineering, Vol. 101, Pages 230-250, 2015

Year 2014

Matthies H., A. Ibrahimbegovic, ‘Stochastic Multiscale Coupling of Inelastic Processes in Solid Mechanics’, in (eds. M. Papadrakakis, G. Stefanou) ‘Multiscale Modeling and Uncertainty Quantification of Materials and Structures’, Springer, Pages 135-157, 2014

NGO V.M., D. BRANCHERIE, A. IBRAHIMBEGOVIC, ‘Softening behavior of quasi-brittle material under full thermo-mechanical coupling condition : Theoretical formulation and finite element implementation’, Computer Methods Applied Mechanics and Engineering, Vol 281, Pages 1-28, 2014

MAMOURI S., F. HAMMADI, A. IBRAHIMBEGOVIC, ‘Decay/Conserving implicit scheme and Nonlinear Instability Analysis of 2D Frame Structures’, International Journal of Nonlinear Mechanics, Vol. 67, Pages 144-152, 2014

Friedman N., G. Farkas, A. Ibrahimbegovic, ‘Parametric study of the elementary segment of an antiprismatic pop-up deployable lattice column’, YBL Journal of Built Environment, 2, 65-86, 2014

NGO V.M., A. IBRAHIMBEGOVIC, D. BRANCHERIE, ‘Stress-resultant model and finite element analysis of reinforced concrete frames under combined mechanical and thermal loads’, Coupled Systems Mechanics, Vol. 3, Pages 111-144, 2014

JUKIC M., B. BRANK, A. IBRAHIMBEGOVIC, ‘Failure analysis of reinforced concrete frames by beam finite element that combines damage, plasticity and embedded discontinuity’, Engineering Structures, Vol 75, Pages 507-527, 2014

NGO V.M., A. IBRAHIMBEGOVIC, E. HAJDO, ‘Nonlinear instability problems including localized plastic failure and large deformations for extreme thermomechanical load, Coupled Systems Mechanics, Vol 3, Pages 89-110, 2014

NIEKAMP R., A. IBRAHIMBEGOVIC, H.G. MATTHIES, ‘Formulation, Solution and CTL Software for Coupled Thermomechanics Systems’, Coupled Systems Mechanics, Vol 3, Pages 1-25, 2014

JEHEL P., P. LEGER, A. IBRAHIMBEGOVIC, ‘Initial versus tangent stiffness-based Rayleigh damping in inelastic time history seismic analyses’, Earthquake Engineering Structural Dynamics, Vol 43, Pages 467-484, 2014

BUI V.N., V.M. NGO, M. NIKOLIC, D. BRANCHERIE, A. IBRAHIMBEGOVIC, ‘Enriched Timoshenko beam finite element for modeling bending and shear failure of reinforced concrete frames’, Computers and Structures, Vol 143, Pages 9-18, 2014

SAKSALA T., A. IBRAHIMBEGOVIC, ‘Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior’, International Journal of Rock Mechanics and Mining Sciences, Vol 70, Pages 460-473, 2014

IBRAHIMBEGOVIC A., R. NIEKAMP, C. KASSIOTIS, D. MARKOVIC, H. MATTHIES, ‘Code-coupling strategy for efficient development of computer software in multiscale and multiphysics nonlinear evolution problems in computational mechanics’, Advances in Engineering Software, Vol 72, Pages 8-17, 2014

Ibrahimbegovic A., L. Davenne, D. Markovic, N. Dominguez, ‘Performance Based Earthquake-Resistant Design : Migrating Towards Nonlinear Models and Probabilistic Framework’, in (ed. M. Fischinger) ‘Performance Based Seismic Engineering – Vision for Earthquake Resilient Society’, Springer, 243-252, 2014

Year 2013

Ngo V.M., A. Ibrahimbegovic, D. Brancherie, ‘Model for localized failure with thermo-plastic coupling : theoretical formulation and ED-FEM implementation’, Computers and Structures, 127, 2-18, 2013

Ibrahimbegovic A., E. Hajdo, S. Dolarevic, ‘Linear instability or buckling problems for mechanical and coupled thermomechanical extreme conditions’, Coupled Systems Mechanics, 2, 349-374, 2013

Friedman N., A. Ibrahimbegovic, ‘Overview of highly flexible, deployable lattice structures used in architecture and civil and engineering undergoing large displacement‘,Ybl Journal of Built Environment, 1, 85-103, 2013

Bohinc U., A. Ibrahimbegovic, B. Brank, ‘Discretization error for the Discrete Kirchhoff plate finite element approximation’, Computer Methods in Applied Mechanics and Engineering, 269, 415-436, 2013

Marenic E., A. Ibrahimbegovic, J. Soric, P.A. Guidault, ‘Homogenized Elastic Properties of Graphene for Small Deformations’, Materials 6, 3764-3782, 2013

Ngo V.M., A. Ibrahimbegovic, D. Brancherie, ‘Continuum damage model for thermo-mechanical coupling in quasi-brittle materials’, Int. J. Engineering Structures, 50, 170-178, 2013

Jukic M., B. Brank, A. Ibrahimbegovic, ‘Embedded discontinuity finite element formulation for failure analysis of planar reinforced concrete beams and frames’, Int. J. Engineering Structures, 50, 115-125, 2013

Friedman N., M. Weiner, G. Farkas, I. Hegedus, A. Ibrahimbegovic, ‘On the snap-back behavior of a self-deploying antiprismatic column during packing’, Int. J. Engineering Structures, 50, 74-89, 2013

Ayhan B., P. Jehel, D. Brancherie, A. Ibrahimbegovic, ‘Coupled Damage-Plasticity Model for Cyclic Loading Applications : Theoretical Formulation and Numerical Implementation’, Int. J. Engineering Structures, 50, 30-42, 2013

Medic S., S. Dolarevic, A. Ibrahimbegovic, ‘Beam Model Refinement and Model Reduction’, Int. J. Engineering Structures, 50, 158-169, 2013

Pham B.H., D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Stress-resultant models for ultimate load analysis of reinforced concrete frames and its multi-scale parameter estimates’, Computational Mechanics, 51, 347-360, 2013

Dujc J., B. Brank, A. Ibrahimbegovic, ‘Stress-hybrid quadrilateral finite element with embedded strong discontinuity for failure analysis of plane stress solids’, Int. J. Numer. Methods Eng., 94, 1075-1097, 2013

IBRAHIMBEGOVIC, A. Probabilistic multiscale methods for dealing with localized failure of heterogeneous structures capable of capturing size effect. Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics : Focus on Multiscale and Multiphysics Problems. Vol 1. Num 1. Pages 1-11. 2013. plenary lecture

IBRAHIMBEGOVIC, A. Multiscale plasticity models of concrete capable of providing size effect, crack spacing and opening. COMPLAS XII Int. Conf. on Computational Plasticity : Fundamentals and Applications. Vol 1. Num 1. Pages 1-10. 2013. conference generale

Year 2012

Ibrahimbegovic A., H.G. Matthies, ‘Probabilistic Multiscale Analysis of Inelastic Localized Failure in Solid Mechanics’, Computer Assisted Methods in Engineering and Science, 19, 277–304, 2012

Marenic E., J. Soric, A. Ibrahimbegovic, ‘Adaptive modelling in atomistic-to-continuum multiscale methods’, Int. J. Serbian Society of Comp. Mech., 6, pp. 169-198, 2012

Hautefeuille M., J.B. Colliat, A. Ibrahimbegovic, H. Matthies, P. Villon, ‘Multiscale approach to modeling inelastic behavior with softening’, Computer and Structures, 94/95, 83-95, 2012

Benkemoun N., A. Ibrahimbegovic, J.B. Colliat, ‘Anisotropic constitutive model of plasticity capable of accounting for details of meso-structure of two-phase composite material‘, Computers and Structures, 90/91, 153-162, 2012

Dominguez N., A. Ibrahimbegovic, ‘A non-linear thermodynamical model for steel-concrete bonding’, Computers and Structures, 106/107, 29-45, 2012

IBRAHIMBEGOVIC, A. TSUNAMI IMPACT ON COASTAL STRUCTURES : PARTITIONED SOLUTION PROCEDURE FOR FLUID-STRUCTURE INTERACTION WITH FREE-SURFACE FLOW. International Symposium on Engineering Lessons Learned from the Giant Earthquake. Vol I. Num 1. Pages 1-11. 2012. keynote lecture

IBRAHIMBEGOVIC, A. Failure models for prediction of crack-spacing and opening for reinforced composites with long fibers and probability framework. ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering. Vol 1. Pages 1-12. 2012. parallel keynote lecture

JEHEL, P., LEGER, P., IBRAHIMBEGOVIC, A. Structural seismic fragility analysis of RC frame with a new family of Rayleigh damping models. Computational Methods in Stochastic Dynamics - (eds. M. Papadrakakis et al.). Vol Vol. 2. Pages 267-292. 2012

IBRAHIMBEGOVIC, A. Composite Structures with Long Fiber Reinforcement : Failure Models for Prediction of Crack-Spacing and Opening. IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures. Vol 1. Pages 1-20. 2012. plenary lecture

ASALI, M., IBRAHIMBEGOVIC, A., MATTHIES, H. Adaptive multiscale strategy for efficient computation of complex heterogeneous structures till failure. IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures. Vol 1. Pages 1-4. 2012

KASSIOTIS, C., IBRAHIMBEGOVIC, A., MATTHIES, H. Efficient coupling algorithms for free-surface flow impacting complexe structures. IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures. Vol 1. Pages 1-4. 2012. poster

AYHAN, B., JEHEL, P., IBRAHIMBEGOVIC, A. The energy dissipation in metal membrane under cyclic loading. IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures. 2012

FRIEDMAN, N., HEGEDUS, I., FARKAS, G., IBRAHIMBEGOVIC, A. Deployment analysis of an antiprismatic snap-through type cylindrical space truss and proposal for a pop-up bridge construction. IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures. Vol 1. Pages 1-4. 2012

Jehel P., P. Leger, A. Ibrahimbegovic, ‘Structural seismic fragility analysis of RC frame with a new family of Rayleigh damping models‘, in (eds. M. Papadrakakis, G. Stefanou, V. Papadopoulos), ‘Computational Methods in Stochastic Dynamics - Vol. 2’, Springer, 267-292, 2012

Year 2011

Dujc J., B. Brank, A. Ibrahimbegovic, ‘Quadrilateral finite element with embedded strong discontinuity for failure analysis of solids’, Computer Modelling in Engineering Science, 69, 223-258, 2011

Friedman N., G. Farkas, A. Ibrahimbegovic, ‘Deployable/retractable structures towards sustainable developments’, Pollack Periodica : International Journal for Engineering and Information Science, 6, 85-97, 2011

Kassiotis C., A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Partitioned solution to nonlinear fluid-structure interaction problems. Part II : CTL based software implementation with nested parallelization’, Computational Mechanics, 47, 335-357, 2011

Kassiotis C., A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Partitioned solution to nonlinear fluid-structure interaction problems. Part I : implicit coupling algorithms and stability proof’, Computational Mechanics, 47, 305-323, 2011

Casaux G., A. Ibrahimbegovic, ‘On multi-fiber beam model with coupled axial and bending response’, European Journal of Computational Mechanics, 20, 411-426, 2011

IBRAHIMBEGOVIC, A., BENKEMOUN, N., COLLIAT, J.B. Éléments finis enrichis pour la modélisation de la rupture des matériaux hétérogènes. 10e Colloque National En Calcul Des Structures. Vol ! . Num 1. Pages 1-6. 2011.

BRANCHERIE, D., PHAM, B.H., DAVENNE, L., IBRAHIMBEGOVIC, A. Calcul de la charge limite ultime de portiques en béton armé. 10e Colloque National En Calcul Des Structures. Vol 1. Num 1. Pages 7-15. 2011.

BENKEMOUN, N., COLLIAT, J.B., IBRAHIMBEGOVIC, A. Anisotropic constitutive model of plasticity accounting for details of meso-structure of two-phases material. COMPLAS XI, XI International conference on computational plasticity fundamentals and applications. 2011. parallel keynote lecture

IBRAHIMBEGOVIC, A. Composites with long fibers : failure models for prediction of crack-spacing and opening. ASEM’11plus:The First World Congress on Advances in Structural Engineering and Mechanics. Vol 1. Num 1. Pages 1-15. 2011. keynote lecture

IBRAHIMBEGOVIC, A. Failure models for quasi-brittle materials with or without reinforcement capable of predicting crack-spacing and opening. Sixth M.I.T. Conference on Computational Fluid and Solid Mechanics — Focus : Advances in Solids & Structures . 2011. parallel keynote lecture

Ibrahimbegovic A., J.B. Colliat, M. Hautefeuille, D. Brancherie, S. Melnyk, ‘Probability based size effect representation for failure of massive engineering structures built of heterogeneous materials’, in (eds. M. Papadrakakis, M. Fragiadakis, G. Stefanou), ‘Computational Methods in Stochastic Dynamics’, Springer, Berlin, 289-311, (2011)

Year 2010

Kassiotis C., A. Ibrahimbegovic, H. Matthies, ‘Partitioned solution to fluid-structure interaction problem in application to free-surface flow’, European Journal of Mechanics, Part B : Fluids, 29, 510-521, 2010

Matthies H.G., R. Niekamp, M. Hautefeuille, D. Jurgens, C. Kassiotis, T. Srisupattarawanit, J.B. Colliat, A. Ibrahimbegovic, Elements of a Computational Framework for Coupled Simulations, GAMM-Mitt. Mechanics and Mathematics, 33, 73 – 78, 2010

Benkemoun N., M. Hautefeuille, J.-B. Colliat and A. Ibrahimbegovic ‘Failure of heterogeneous materials : 3D meso-scale FE models with embedded discontinuities’, International Journal for Numerical Methods in Engineering, 82, 1671-1688, 2010

Ibrahimbegovic A., A. Boulkertous, L. Davenne, D. Brancherie, ‘Modeling of reinforced-concrete structures providing crack-spacing based on XFEM, ED-FEM and novel operator split solution procedure, International Journal for Numerical Methods in Engineering, 83, 452-481, 2010

Dujc J., B. Brank, A. Ibrahimbegovic, ‘Multi-scale computational model for failure analysis of metal frames that includes softening and local buckling’, Computer Methods in Applied Mechanics and Engineering, vol. 199, 1371-1385, 2010

Kassiotis C., A. Ibrahimbegovic, H.G. Matthies and B. Brank, ‘Stable splitting scheme for general form of associated plasticity including different scales of space and time’, Computer Methods in Applied Mechanics and Engineering, vol.199, 1254-1264, 2010

Ibrahimbegovic A., A. Boulkertous, L. Davenne, M. Muhasilovic, A. Pokrklic, ‘On modeling of fire resistance tests on concrete and reinforced-concrete structures’, Computers and Concrete, vol 7. No. 4, 285-301, 2010

Pham B.H., L. Davenne, D. Brancherie, A. Ibrahimbegovic, ‘Stress-resultant model for ultimate load behavior of reinforced-concrete frames. Combined effect of axial force and bending failure’, Computers and Concrete, vol 7, no 4, 303-315, 2010

Jehel P., L. Davenne, A. Ibrahimbegovic, P. Leger, ‘Towards robust viscoelastic-plastic-damage model with different hardening-softening capable of representing salient phenomena in seismic loading applications’, Computers and Concrete, vol 7. No. 4, 365-386, 2010

Dujc J., B. Brank, A. Ibrahimbegovic, D. Brancherie, ‘An embedded crack model for failure analysis of concrete solids’, Computers and Concrete, vol 7. No. 4, 331-346, 2010

Dominguez N., M.A. Fernandez, A. Ibrahimbegovic, ‘Enhanced solid element for modelling of reinforced-concrete structures with bond slip’, Computers and Concrete, vol 7. No. 4, 347-364, 2010

Ibrahimbegovic A., L. Davenne, J.B. Colliat, D. Brancherie, ‘Computational mechanics of integrity and durability in extreme environment for concrete and reinforced concrete structures’, IACM Expressions, 27, 7-13, 2010

DAVENNE, L., BOULKERTOUS, A., IBRAHIMBEGOVIC, A. Influence of the steel-concrete bond-slip on the behavior of RC structures under severe conditions. CONSEC10. 2010.

IBRAHIMBEGOVIC, A. Heterogeneous materials and failure with size effect. WCCM/APCOM 2010. 2010. keynote lecture

MATTHIES, H., NIEKAMP, R., HAUTEFEUILLE, M., KASSIOTIS, C., IBRAHIMBEGOVIC, A. Elements of a Computational Framework for Coupled Simulations. GAMM-Mitt.. Vol 33. Pages 73-78. 2010

IBRAHIMBEGOVIC, A. Nonlinear Analysis of Structures under Extreme Conditions. CEC-2010 Construction under exceptional conditions. Vol I. Num 1. Pages 1-20. 2010. plenary lecture

IBRAHIMBEGOVIC, A. Multi-scale models and mathematical aspects in solid and fluid mechanics. Computer Methods in Applied Mechanics and Engineering. Vol 199. Num 21-22. Pages 1241-1241. 2010

IBRAHIMBEGOVIC, A., DAVENNE, L., COLLIAT, J.B., BRANCHERIE, D. Computational mechanics of integrity and durability in extreme environment for concrete and reinforced concrete structures. IACM Expressions. Vol 27. Pages 7-13. 2010

Year 2009

Brank B., A. Ibrahimbegovic, U. Bohinc, ‘On prediction of 3D stress state in elastic shell by higher-order shell formulations’, Computer Modelling in Engineering Science, vol. 33, 85-108 (2009)

Ibrahimbegovic A., B. Brank, ‘Recent developments in nonlinear shell theory with finite rotations and finite deformations’, International Journal of Engineering Modeling, 21, 1-14 (2009)

Brancherie D., A. Ibrahimbegovic, ‘Novel anisotropic continuum-discrete damage model capable of representing localized failure of massive structures. Part I : theoretical formulation and numerical implementation’, International Journal of Engineering Computations, 26, 100-127 (2009)

Kucerova A., D. Brancherie, A. Ibrahimbegovic, J. Zeman, Z. Bittnar, ‘Novel anisotropic continuum-discrete damage model capable of representing localized failure of massive structures. Part II : identification from tests under heterogeneous stress field, International Journal of Engineering Computations, 26, 128-144 (2009)

Ibrahimbegovic A., G. Herve, P. Villon, ‘Nonlinear impact dynamics and field transfer suitable for parametric design studies’, International Journal of Engineering Computations, 26, 185-204 (2009)

Kassiotis C., J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Multiscale in time and stability analysis of operator split solution procedure applied to thermomechanical problems’, International Journal of Engineering Computations, 26, 205-223 (2009)

Hautefeuille M., S. Melnyk, J.B. Colliat, A. Ibrahimbegovic, ‘Probabilistic aspects of localized failure of massive heterogeneous structures’, International Journal of Engineering Computations, 26, 166-184 (2009)

Markovic D., A. Ibrahimbegovic, K.C. Park , ‘Model reduction strategy for transient analysis of large structures with inelastic behavior’, International Journal of Engineering Computations, 26, 45-68 (2009)

Bohinc U., A. Ibrahimbegovic, B. Brank, ‘Model adaptivity for finite element analysis for thick and thin plates’, International Journal of Engineering Computations, 26, 69-99 (2009)

Niekamp R., D. Markovic, A. Ibrahimbegovic, H. G. Matthies, R.L. Taylor, ‘Multi-scale modeling of heterogeneous structures with inelastic constitutive behavior. Part II : Software coupling and implementation aspects‘, International Journal of Engineering Computations, 26, 6-28 (2009)

Ibrahimbegovic A., A. Kucerova, D. Brancherie, M. Hautefeuille, J.B. Colliat, N. Friedman, and M. Zlatar, ‘Civil engineering structures : multiscale damage representation, identification, controlled destruction and quick reconstruction’, in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 1-28, 2009

Dolarevic S., Ibrahimbegovic A., ‘Nonlinear behavior of soils as the main source of damage in structures’, in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 299-320, 2009

Ibrahimbegovic A., A. Boulkertous, L. Davenne, M. Muhasilovic, J. Duhovnik, A. Pokrklic, ‘Fire induced damage in structures and infrastructure : analysis, testing and modeling’, in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 321-342 2009